If you are looking for a mag meter that will function on low conductive
liquids and has electrodes that do not come in contact with the media take a look at this
new meter from Krohne.
· Precision Flowmeter
· With capacitive signal pickup (electrodes not in contact with the
product)
· Minimum required electrical conductivity only 0.O5pS/cm (water: 1 pS/cm)
· No need for selection of electrode material, liner has high
chemical resistance
· No electrochem lea effects at the electrodes, also suitable for the
most difficult chemical processes
· Not affected by electrically insulating deposits
· Abrasion resistant, suitable for products with high solids contents
· No crevices, no blind spots; hygienic
· With flow profile-optimizing measuring tube
| Signal Converter |
IPO 090 K-CAP (similar to IFC 090 K) |
| Electrical Conductivity |
>0,05 S/cm (water > 1 uS/cm) |
| Full Scale Range |
530 liter/h - 340 m3/h
2.3-1 500 US Gal/min |
| Meter Size |
DN 25-lOO and l"-4" |
| Pressure Rating |
up to 40 bar/580 psig |
| Product Temperature |
20 to + 100 0C/- 4 to + 2120F |
| Protection Catagory |
IP 67, equivalent to NEMA 6 |
| Materials |
fused aluminium oxide, 99.7 % A1203capacitive
electrodes, not wetted |
Hazardous
Duty Versions |
yes, in preparation
yes, in preparation |
Fields of Applications
Industry
Abrasion Resistance
Chemical Resistance of Liner |
All sectors where what counts are leak tight and
crevive-free tubes for flow-metering the most difficult products including: low
conductivity and deposit forming products. Extremely High
NaOH up to 50% at 122 degrees F..HNO3 up to 99% at 194 degrees F, all
concentrations up to 122 degrees F |
