If you are interested in receiving a price quotation on this item take a look at the TIDALFLEX PART NUMBER/QUOTATION GENERATION PAGE

THEORY OF OPERATION:

INTRODUCTION

The new Tidalflux from Krohne can accurately measure flows in pipes that are as little as 10% full.  Now you can get the accuracy of a mag meter without the full pipe requirement. 

The Tidalflux Magnetic Flowmeter is designed for those applications where the pipe is not always completely filled with liquid. Conventional meters assume   a full pipe and report volumetric flow  rates based on that assumption. Since there are many installations where partially filled pipes are common, the Tidalflux measures both level in the pipe and liquid velocity to provide the true volumetric flow through the meter. Unlike devices using multiple electrodes to sense a full or empty pipe condition, the Tidalflux integrates a capacitance level sensor into the wall of the flowtube.

This non wetted sensor provides the converter with a continuous measurement of level in the meter. The magnetic flowmeter velocity sensing electrodes have been moved lower in the flow tube permitting a 1% flow rate accuracy with as little as 10% level in the flowtube.

The meter is ideally suited for water and waste water applications replacing traditional open channel metering techniques. The savings in installation, commissioning, and maintenance costs make it a very attractive choice.

The Flow velocity V is measured
by means of teh magnetic inductive principle and the wetted area A is computed using the integrated capacitive level measurement.

· Designed for partially filled pipelines

· Excellent measuring accuracy, also for low levels, through the integrated capacitive level measuring system

· Saves installation and maintenance of sluice underpasses

If you would like a price quote on a Tidalflux simply email us and we will email or fax you a quote!