Process Controls Corporation Home Locations About Us Manufacturers Contact Us Site Map
Process Controls Corporation
Vacuum Systems & Gas Compression Instrumentation & Measurement Controls, Systems & Valves Process & Plant Equipment
 

SEARCH
Process Controls Corporation
 

Combustion & Environmental Monitoring
 
Thermox Direct INSITU Flue Gas Oxygen Analyzers
The Thermox Direct Insitu Flue Gas Oxygen Analyzers Industry Standard Oxygen Insitu-probe, good to 1250° F (677° C) flue gas temperature, with unique modular design facilitating maximum on-flange accessibility to critical components including filter.

Available models include the WDG Insitu Probe; a direct insertion-type zirconium oxide based oxygen probe for flue gas temperatures to 1250°F (677°C), with modular inner/outer probe design for access to cell, heater/thermocouple, and probe filter without removal of probe from mounting flange. The LCC is a low cost, self-contained insitu probe with digital display on the probe head. Ideal for light oil or gas-fired, horsepower-rated package boilers and for OEM applications.

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Direct INSITU Flue Gas Oxygen Analyzers

Thermox WDG-INSITU 2000g Flue Gas Oxygen Analyzers
Thermox WDG 210/INSITU Low-Cost Flue Gas Oxygen Analyzer
Thermox WDG-INSITU Flue Gas Oxygen Analyzer
Thermox INSITU-CENELEC Flue Gas Oxygen Analyzer

Thermox Chimney-Effect Convection Analyzers
The Thermox Chimney-Effect Convection Analyzers for High Temperature/Particulate Applications are used in oxygen only or combined oxygen and combustibles measurement in aggressive high-temperature, heavy particulate, corrosive or saturated flue gas streams.

Available models include the Model WDG-HPII, an oxygen unique chimney-effect/convective sampling technology that incorporates the advantages of insitu probe high particulate sampling with high temperature and corrosion resistance of extractive analyzers. The HPII is ideal for challenging oxygen measurement applications in cement and lime kilns, foundry operations, waste to energy boilers, and fluidized bed combustion systems. High performance probe and filter materials allow sampling of flue gas streams with temperatures to 2800°F (1537°C).

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Chimney-Effect Convection Analyzers

Thermox ATEX II 3 G WDG-HPII Series Convection Analyzers
Thermox WDG-HPII Flue Gas Oxygen Analyzers
Thermox WDG-HPIIC Flue Gas Oxygen Analyzers
Thermox WDG-HPII/IQ Smart Flue Gas Oxygen Analyzers

Thermox Continuous-Loop Eductor Analyzers
Continuous-Loop Eductor Analyzers for Gas/Oil/Coal-Fired Power Generation & Refinery Boilers and Process Heaters is oxygen only, or combined oxygen, combustibles/methane analyzers in custom and standard configurations for on-demand combustion process control and safety.

Available models include the Model WDG-IV Oxygen/ Continuous-Loop Sampling and Chimney-Effect Convection Stack recreates combustion process archetecture within the sensor for highly representative and fast response to changes in flue gas oxygen. Ideal for gas/oil-fired refinery process heaters, reformers, and power or steam boilers with rapidly changing loads. High performance probe and insitu filter materials adapt sensor to coal and other solid fuel-fired applications. High temperature metal and ceramic probe materials allow sampling to 3200°F (1760°C).

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Continuous-Loop Eductor Analyzers

Thermox WDG-IV Flue Gas Oxygen Analyzers
Thermox ATEX II 3 G WDG-IV Series Gas Oxygen Analyzers
Thermox ATEX II 3 G WDG-IV UOP/RP Gas Oxygen Analyzers
Thermox WDG-IV UOP/RP Gas Oxygen Analyzers

Thermox Analyzers for Combustion Premix Burner Stations
Analyzers for Combustion Premix Burner Stations are used in glass container and fiber glass manufacturing plants for post combustion analysis of glass furnace flue gas and pre combustion analysis of forehearth and fiberizer burner premix stations. Available models include the Model CMFA-P 2000 Transportable Analyzer is typically used in glass container manufacturing plants. The CMFAP (Combustion Mix Flue Gas Analalyzer) is capable of post combustion spot sampling at the checker ports on glass furnaces and pre-combustion analysis of air to fuel ratio settings on forehearth premix zones. The Model PreMix 2000 Fixed System Analyzer is used for pre-combustion analysis of forehearth and fiberizer burner stations on fiberglass manufacturing lines.

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Analyzers for Combustion Premix Burner Stations

Thermox CMFA-P2000 Portable Premix Gas/Flue Gas Analyzer
Thermox Premix 2000 Air/Fuel Ratio Analyzer

Thermox Analyzers for Inert Gas Atmospheres
Analyzers for Inert Gas Atmospheres are used for PPM level oxygen measurement of inert blanketing gas atmospheres for coating, curing, and surface treatment processes.

Available models include the TM2000 Oxygen Analyzer. The TM2000 protects industrial processes by quickly responding to changes using an industry-proven zirconium oxide sensor. It operates within a wide operating range of 0.1 ppm to 100% oxygen, and can accurately respond from atmosphere to low ppm oxygen levels in just seconds. In addition, the TM2000 can detect excess combustibles process upsets in the presence of very low ppm oxygen readings. This unique benefit is particularly important in cryogenic gas generating processes, where the TM2000 can distinguish between an oxygen upset condition and an excess combustibles upset condition. The TM2000 is supported by the state-of-the-art Series 2000 controller, with input and output electronic transient protection and a standard weatherproof housing. The controller is housed separately from the sensor.

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Analyzers for Inert Gas Atmospheres

Thermox TM2000 Portable Trace Oxygen Analyzer
Thermox CG1100 Oxygen Analyzers

Thermox Analyzers for Flame Treating, Reducing/Oxidizing Atmospheres, & Stoichiometric A/F Ratio
Analyzers for Flame Treating, Reducing/Oxidizing Atmospheres, & Stoichiometric A/F Ratio feature extended range ZrO2 software enabled combustion analyzers for air/fuel ratio adjustment of syngas-fired furnaces and sub-stoichiometric furnace atmospheres. Featured products include Model S A/F IQ Stoichiometric Air-to Fuel Ratio analyzer for Steel Mill blast furnace and coke oven gas blending for BTU stabalization. The Model WDG-IV with Excess Fuel Option is a continuous-loop sampling and chimney-effect convection stack sensor combine with powerfull extended range ZrO2 technology for accurate measurement of oxidizing/reducing furnace atmospheres.

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Analyzers for Flame Treating, Reducing/Oxidizing Atmospheres, & Stoichiometric A/F Ratio

Thermox S A/F IQ Smart Air Demand Analyzer
Thermox WDG-IV Flue Gas Oxygen Analyzer

Thermox Component Wet/O2 Analyzers for CEM Systems Integration
Component Wet/O2 Analyzers for CEM Systems Integration are ZrO2 self-contained oxygen analyzers in compact enclosure for CEM systems wet/O2 analysis. Available models include the CEM/O2 Stand-Alone ZrO2 Oxygen Analyzer capable of making wet or dry oxygen measurement for replacement of exisiting ZrO2-based CEM systems analyzer or in addition to an existing CEM system.

Click here to Request a Quote.

PDF FormatClick below to download the product brochures in PDF Format.
Thermox Component Wet/O<sub>2</sub>  Analyzers for CEM Systems Integration

Thermox CEM O2 Oxygen Analyzer and Options
Thermox CEM O2 Oxygen Analyzer

Thermox IR-CO Specific Stack-Mount Transmitter
The IR-CO Specific Stack-Mount Transmitter is a stack-mounted INSITU across the stack infrared CO-specific measurement for compliance and ESP (Electro-static precipitator), protection.

Click here to Request a Quote.
Thermox IR-CO Specific Stack-Mount Transmitter


Thermox Portable Combustion Efficiency & Compliance Analyzer
The Portable Combustion Efficiency & Compliance Analyzer is a portable, suitcase-style flue gas monitoring systems. These systems are ideal for spot monitoring, troubleshooting, duct traverse sampling, and Nox/SO2 compliance verification. Measurable parameters include O2, CO, Nox, SO2, temperature, and pressure. Battery powered combustion efficiency monitors based upon electrochemical sensor technologies.

Click here to Request a Quote.
Thermox Portable Combustion Efficiency & Compliance Analyzer


Process Controls Corporation