Process Controls Corporation Home Locations About Us Manufacturers Contact Us Site Map
Process Controls Corporation
Vacuum Systems & Gas Compression Instrumentation & Measurement Controls, Systems & Valves Process & Plant Equipment
 

SEARCH
Process Controls Corporation
 

Vortex
 
Sierra Model 240 Innova-Mass® Inline Multiparameter
Mass Flow Meter
The Model 240 provides a direct reading of FIVE process parameters at the same time. Low maintenance, easy installation and great configuration flexibility. Product mass flow measurement accuracy is ± 1% of rate for liquids and 1.5% of rate for gases and steam over a 30:1 range. Unique Product Features include: 1) Volumetric flow monitoring of most gases, liquids and steam; 2) Rangeable down to Reynold's number of 5000; 3) In-line sizes from 1/4 " to 8"; 4) 1% rate accuracy (liquids) or 0.7% for gases over a 30:1 turndown; 5) Fully field configurable; and 6) Loop powered with 4-20ma output.

PDF FormatClick below to download the product brochures in PDF Format.
Sierra Instruments Mass Flow Meter Brochure
Sierra Instruments Model 240-241 Datasheet
Sierra Instruments Full Line Datasheet
Sierra Model 240 Innova-Mass® Inline Multiparameter<BR>Mass Flow Meter

Sierra Model 241 Innova-Mass® Insertion Multiparameter
Mass Flow Meter
The Model 241 provides a direct reading of FIVE process parameters at the same time in process pipe sizes up to 72 inches. Low maintenance, easy installation, and great configuration flexibility. Product mass flow measurement accuracy is ± 1.5% of rate for liquids and 2% of rate for gases and steam over a 30:1 range. Unique Product Features include: 1) Volumetric flow monitoring of most gases, liquids and steam; 2) Rangeable down to Reynold's number of 5000; 3) In-line sizes from 2" to 72"; 4) 1.2% rate accuracy (liquids) or 1.5% for gases over a 30:1 turndown; 5) Fully field configurable and 6) Loop powered with 4-20ma output.

PDF FormatClick below to download the product brochures in PDF Format.
Sierra Instruments Mass Flow Meter Brochure
Sierra Instruments Model 240-241 Datasheet
Sierra Instruments Full Line Datasheet
Sierra Model 241 Innova-Mass® Insertion Multiparameter<BR>Mass Flow Meter

Sierra Instruments Flow=Trak™ Dual-Plate Flow Conditioning Element
This flow conditioning element represents an economical solution to flow measurement problems where long, straight runs of piping are not available. Unique Product Features include 1) Greatly reduces straight run requirements; 2) Low pressure drop; 3) May be used in very large diameter pipes; and 4) Designed for use with ANY point-velocity flow measurement device.

PDF FormatClick below to download the product brochures in PDF Format.
Sierra Instruments Flow Conditioning Plates Datasheet
Sierra Instruments Full Line Datasheet
Sierra Instruments Flow=Trak™ Dual-Plate Flow Conditioning Element

Process Controls Corporation