HI 2151/30WC Weight Controller
| The HI 2151/30WC Weight Controller is used for a wide variety of process weighing applications including batching, blending, check weighing, filling/dispensing, force measurement, level by weight and weight rate monitoring. As a stand-alone product, the HI 2151/30WC can control as many as eight set point relays, and transmit data via analog, serial and BCD communications. Data is displayed alpha-numerically on the six digit fourteen segment LED display and graphically on the 30 segment bar graph display. Weight values can be based on either Net, Gross, Rate-of-Change (ROC), Peak Hold or Totalized weight values in pounds or kilograms. The weight controller can also be used as a front end for a control system, transmitting weight values via a standard operator selectable serial port (RS-232, RS-422/485) to programmable logic controllers (PLC’s), computers, and printers. An optional Allen Bradley Remote I/O, Analog and PROFIBUS interface is available for communication to programmable logic controllers. Click here to Request a Quote.
HI 2151/30WC Weight Controller Brochure |  |  |
HI 4050 Weight Controller
| The HI 4050 Weight Controller acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone instrument for simple control or weight monitoring. Configure the HI 4050 to suit your applications: specify it with or without a display; choose either AC or DC power, select a communication network: Analog, DeviceNet, EtherNet/IP, Allen-Bradley Remote I/O, Profibus, or Modbus TCP/IP. Choose between a panel/remote mount and a DIN rail mount. With a display, you choose either to panel mount the entire assembly, or to mount the controller housing assembly remotely. Installation is easy, with no special tools or expertise required. The HI 4050 Series controller is designed to optimize panel space. With its embedded web server, all the instrument’s parameters can be set up from anywhere on the Ethernet network. Expandable Secure Memory Module (SMM®-SD) – Hardy’s rear panel accessible SMM is more than just a memory card; it’s a network media that connects SD-enabled products. C2®Electronic Calibration – C2® enables fast accurate electronic calibration of your scale. INTEGRATED TECHNICIAN® – In conjunction with an IT® Junction Box, the controller provides built-in system diagnostics that allow you to troubleshoot and diagnose your weighing system right from its front panel, your intranet or the Internet. WAVERSAVER® – WAVERSAVER eliminates the effects of unwanted vibration on or around the scale by permitting the instrument to “see” through the unwanted vibration signals – as low as 0.25Hz – while yielding a stable actual reading. Click here to Request a Quote.
HI 4050 Weight Controller Brochure | |  |
HI 3030 Multi-Scale Weight Controller
| The HI 3030 Multi-Scale Weight Controller can act as a front end to a PLC, PC or DCS system for applications such as level, batching, filling, dispensing, and check weighing, or as a stand alone for simple control or weight monitoring. As a bridge to a PLC, its four scales can share one network connection, whether it’s DeviceNet, ControlNet, Ethernet/IP, Allen-Bradley Remote I/O, or Profibus. Benefits include a simple PLC SOLUTION providing easy connectability; a stand alone solution to save on programming costs; complete flexibility in I/O mapping with 12 independent internal setpoints. Includes INTEGRATED TECHNICIAN®, in conjunction with an IT Junction Box, provides built-in system diagnostics that allow you to troubleshoot and diagnose your weighing system right from its front panel, a PDA, your intranet or the internet. You can read individual load sensor voltages and weights, make comparisons, and isolate individual system components for quick and easy troubleshooting. Click here to Request a Quote.
HI 3030 Multi-Scale Weight Controller Brochure | |  |
